Jelco TK-850S MKII 9" toonarm

Artikel 3 van 4

S p e c i f i c a t i o n s :

model	TK-850S MKll
Bearing System	Knife Edge
Effective length (from the tonearm pivot to stylus point)	232 mm
Distance of the tonearm pivot to spindle	214 mm
Overhang (spindle to stylus point)	18 mm
Offset angle	23.75°
Tracking error angle	＋1.96° －1.03°
Horizontal sensitivity (first action, inner wire free)	30 mg
Vertical sensitivity (first action, inner wire free)	30 mg
Suitable cartridge weight with headshell	17~35 gr
Effective mass	13.5 gr
Range of height adjustment (distance between the arm base bottom and center of the arm pipe)	38~60 mm
Inner cable	PCUHD w/ Silver plate

TK-850S MKll

F e a t u r e s :

Bearing for vertical direction equipped super steel metal KNIFE EDGE system.
This Knife Edge material is specially made of super steel, and have very stable and smooth operation.
This Knife Edge is precision hand made, and result is to have very low friction.
Inner cable is employed thicker silver plated PCUHD (Pure Copper Ultra High Drawability) cable.
Relation of electrically wiring, all connected metal tip, connector pin and 5 pin terminal are Rhodium plated.
Designed Hi-mass type system, and deferent kind metal material used for anti vibration, those are very low gravity, and low gravity sound created from this.
Head shell is employed silk weaved OFC Litz lead wires.
Simple mechanism create good reproduction sound.
The tonearm geometry allows for a Baerwald alignments which is IEC recommendations.
This universal type counterweight can be used from 17 to 35 grs cartridge weight including head shell.
TK-850S MKll is fitted with a standard head shell and can easily be changed with other standard head shell (cartridge).
This attached head shell can adjust the azimuth angle of the cartridge.

Wij hebben alle Jelco toonarmen op voorraad, maar deze worden alleen geleverd bij aankoop van een Transrotor of Michell draaitafel.